Select article:
This item corresponds to your selection:
DELIVERY: APPROXIMATELY 75 WORKING DAYS
Similar Products
Price on request
Add to basket
Buy:
from £5,320.00  
Add to basket
Buy:
£2,897.50 £3,050.00
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Buy:
£549.00  
Add to basket
Price on request
Add to basket
Buy:
from £5,180.00  
Add to basket
Buy:
from £3,920.00  
Add to basket
Buy:
from £4,770.00  
Add to basket
Price on request
Add to basket
Buy:
from £4,060.00  
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Buy:
from £4,990.00  
Add to basket
Price on request
Add to basket
Technical details
Technical details
Lift range 90 - 1540 mm
Mast Single-stage mast
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1685 mm
Ground clearance 30 mm
Travel speed, laden/unladen 4,2 / 5 km/h
Battery type Lead-gel battery
Battery capacity 70 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 545 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 0.5 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Free lift 1507 mm
Lift speed with/without load 0.09 / 0.12 m/s
Max. gradeability laden/unladen 3,5 / 15 %
No. of batteries 1
Operating hours 900 h/Jahr
Residual load capacity 1,000 kg (at lift height: 1,540 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 1540 mm
Mast height 1970 - 1992 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 1994 mm
Lift motor output 1.2 kW
Turning radius 1378 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 63 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 535 mm
Fork roller diameter 77 mm
Fork roller width 70 mm
Fork width 185 mm
Hydraulic one-step
Lowering speed with/without load 0,11 / 0,11 m/s
Model Jungheinrich EMC 110
Noise level as per EN 12053 (operator's ear) 70 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Technical details
Lift range 90 - 1540 mm
Mast Single-stage mast
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1685 mm
Ground clearance 30 mm
Travel speed, laden/unladen 4,2 / 5 km/h
Battery type Lead-gel battery
Battery capacity 70 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 545 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 0.5 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Free lift 1507 mm
Lift speed with/without load 0.09 / 0.12 m/s
Max. gradeability laden/unladen 3,5 / 15 %
No. of batteries 1
Operating hours 900 h/Jahr
Residual load capacity 1,000 kg (at lift height: 1,540 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 1540 mm
Mast height 1970 - 1992 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 1994 mm
Lift motor output 1.2 kW
Turning radius 1378 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 63 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 535 mm
Fork roller diameter 77 mm
Fork roller width 70 mm
Fork width 185 mm
Hydraulic one-step
Lowering speed with/without load 0,11 / 0,11 m/s
Model Jungheinrich EMC 110
Noise level as per EN 12053 (operator's ear) 70 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Product description
Product description
The EMC 110 features an electric drive and lift motor and offers maximum ease of use with a capacity of 1000 kg. This robust and versatile product is characterised by its outstanding reliability and premium quality "Made in Germany". Thanks to its very short headlength and low weight, the truck is ideal for use in tight spaces, lifts and on mezzanines.
Maintenance-free three-phase AC drive motor Ergonomic working thanks to multifunction tiller head PIN code access Slow travel button for safe operation in tight spaces Highly manoeuvrable thanks to compact dimensions On-board charger for simple charging Optional wide-track version available
The EMC 110 electric stacker truck from Jungheinrich for fully electric travel and lifting with extremely compact dimensions

The versatile EMC 110 is the perfect solution for a wide range of applications, such as sorting rack-stored goods. You can also use it as a lift table, allowing you to raise the goods on the pallet to the necessary height before storing them or removing them from the pallet in an ergonomic, fatigue-free manner.

Thanks to a multitude of ergonomic and technical features, the electric truck combines maximum ease of use with impressive safety levels. At the same time, the long tiller ensures minimal steering effort and utmost protection for the operator. All travel and lift functions are controlled via the multifunction tiller head with minimum effort and without the need to change your grip. This allows you to devote your full attention to the task at hand. The single-stage mast permits a perfect view of the load at all times.

The EMC 110 is a highly compact pedestrian truck. Its short headlength and low weight make it extremely agile. This makes it ideal for use in confined spaces, in lifts and on mezzanines. Even with the tiller raised, the slow travel button allows you to manoeuvre the EMC 110 easily and safely in tight spaces. In this case, the truck automatically travels at a reduced speed.

The EMC also offers impressive energy performance. Thanks to the on-board charger, you can charge the 70 Ah block batteries at any 230 V mains socket. The battery discharge indicator provides you with a reliable reading of battery charge status at all times.
The powerful, maintenance free drive motor features 24 V three-phase AC technology for rapid and efficient stock turnover as well as cost-effective operation.

An optional wide-track version of the EMC 110 electric stacker is also available with 2 different lift heights. Order the powerful EMC 110 from our shop in your chosen configuration.
Product description
The EMC 110 features an electric drive and lift motor and offers maximum ease of use with a capacity of 1000 kg. This robust and versatile product is characterised by its outstanding reliability and premium quality "Made in Germany". Thanks to its very short headlength and low weight, the truck is ideal for use in tight spaces, lifts and on mezzanines.
Maintenance-free three-phase AC drive motor Ergonomic working thanks to multifunction tiller head PIN code access Slow travel button for safe operation in tight spaces Highly manoeuvrable thanks to compact dimensions On-board charger for simple charging Optional wide-track version available
The EMC 110 electric stacker truck from Jungheinrich for fully electric travel and lifting with extremely compact dimensions

The versatile EMC 110 is the perfect solution for a wide range of applications, such as sorting rack-stored goods. You can also use it as a lift table, allowing you to raise the goods on the pallet to the necessary height before storing them or removing them from the pallet in an ergonomic, fatigue-free manner.

Thanks to a multitude of ergonomic and technical features, the electric truck combines maximum ease of use with impressive safety levels. At the same time, the long tiller ensures minimal steering effort and utmost protection for the operator. All travel and lift functions are controlled via the multifunction tiller head with minimum effort and without the need to change your grip. This allows you to devote your full attention to the task at hand. The single-stage mast permits a perfect view of the load at all times.

The EMC 110 is a highly compact pedestrian truck. Its short headlength and low weight make it extremely agile. This makes it ideal for use in confined spaces, in lifts and on mezzanines. Even with the tiller raised, the slow travel button allows you to manoeuvre the EMC 110 easily and safely in tight spaces. In this case, the truck automatically travels at a reduced speed.

The EMC also offers impressive energy performance. Thanks to the on-board charger, you can charge the 70 Ah block batteries at any 230 V mains socket. The battery discharge indicator provides you with a reliable reading of battery charge status at all times.
The powerful, maintenance free drive motor features 24 V three-phase AC technology for rapid and efficient stock turnover as well as cost-effective operation.

An optional wide-track version of the EMC 110 electric stacker is also available with 2 different lift heights. Order the powerful EMC 110 from our shop in your chosen configuration.