Select article:
This item corresponds to your selection:
DELIVERY: APPROXIMATELY 70 WORKING DAYS
Similar Products
Buy:
from £5,180.00  
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Buy:
from £5,320.00  
Add to basket
Price on request
Add to basket
Buy:
from £4,770.00  
Add to basket
Buy:
from £4,060.00  
Add to basket
Price on request
Add to basket
Buy:
from £4,990.00  
Add to basket
Buy:
from £7,160.00  
Add to basket
Price on request
Add to basket
Price on request
Add to basket
Buy:
from £4,280.00  
Add to basket
Price on request
Add to basket
Buy:
from £3,920.00  
Add to basket
Technical details
Technical details
Lift range 90 - 4180 mm
Free lift 1338 mm
Mast height 1845 - 4597 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2235 mm
Lift motor output 1.7 kW
Turning radius 1474 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 50 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 744 mm
Fork roller diameter 77 mm
Fork roller width 75 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,33 / 0,33 m/s
Model Jungheinrich EJC 110/DZ
Operating hours 1200 h/Jahr
Residual load capacity 1,000 kg (at lift height: 2,900 mm)
700 kg (at lift height: 3,600 mm)
520 kg (at lift height: 4,090 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 4090 mm
Mast Three-stage telescopic mast with free lift (DZ)
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1894 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lithium-ion
Battery capacity 130 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 615 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0,12 / 0,22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Technical details
Lift range 90 - 4180 mm
Free lift 1338 mm
Mast height 1845 - 4597 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2235 mm
Lift motor output 1.7 kW
Turning radius 1474 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 50 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 744 mm
Fork roller diameter 77 mm
Fork roller width 75 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,33 / 0,33 m/s
Model Jungheinrich EJC 110/DZ
Operating hours 1200 h/Jahr
Residual load capacity 1,000 kg (at lift height: 2,900 mm)
700 kg (at lift height: 3,600 mm)
520 kg (at lift height: 4,090 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 4090 mm
Mast Three-stage telescopic mast with free lift (DZ)
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1894 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lithium-ion
Battery capacity 130 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 615 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0,12 / 0,22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Product description
Product description
The EJC 110/DZ electric stacker truck is a premium Jungheinrich product boasting outstanding quality "Made in Germany". It is ideal for transporting loads weighing up to 1000 kg and for stacking pallets up to a height of 4,300 mm. The triplex mast reaches very high lift heights with a comparatively low design height. As a result, it fits through virtually every door and is also suitable for use in buildings with low ceiling heights.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access With innovative lithium-ion technology On-board charger for simple battery charging Choice of masts and lift heights
The EJC 110/DZ represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

This electric high-lift truck from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1,000 kg across short distances and stacking or retrieving pallets at heights of up to 4,300 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 110 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 110 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and slow travel button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a three-stage telescopic mast with free lift. With the DZ or triplex mast, very high lift heights can be reached with a comparatively low design height. The DZ mast also offers a high free lift, meaning that the load carriage is raised without altering the height of the mast. Once the maximum free lift has been reached, the fork carriage and mast extend in a 1:1 ratio.

The electric stacker truck boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption. The electric stacker truck is equipped with innovative lithium-ion technology. When compared to conventional lead-acid batteries, these high-performance batteries impress with their lasting performance, faster charging times and lack of maintenance requirements. The on-board charger ensures straightforward, flexible charging at any 230 V socket.

Jungheinrich offers a 6-month satisfaction guarantee for its electric stacker trucks equipped with lithium-ion technology. With this guarantee, customers can quickly and easily revert to the original technology. In addition, Jungheinrich guarantees the long-term performance of the installed lithium-ion battery by covering it with up to 8 years of warranty.

The Jungheinrich EJC 110/DZ electric stacker truck with three-stage telescopic mast and free lift reaches very high lift heights with a comparatively low design height. Order the electric high-lift stacker truck from our shop in your chosen configuration.
Product description
The EJC 110/DZ electric stacker truck is a premium Jungheinrich product boasting outstanding quality "Made in Germany". It is ideal for transporting loads weighing up to 1000 kg and for stacking pallets up to a height of 4,300 mm. The triplex mast reaches very high lift heights with a comparatively low design height. As a result, it fits through virtually every door and is also suitable for use in buildings with low ceiling heights.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access With innovative lithium-ion technology On-board charger for simple battery charging Choice of masts and lift heights
The EJC 110/DZ represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

This electric high-lift truck from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1,000 kg across short distances and stacking or retrieving pallets at heights of up to 4,300 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 110 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 110 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and slow travel button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a three-stage telescopic mast with free lift. With the DZ or triplex mast, very high lift heights can be reached with a comparatively low design height. The DZ mast also offers a high free lift, meaning that the load carriage is raised without altering the height of the mast. Once the maximum free lift has been reached, the fork carriage and mast extend in a 1:1 ratio.

The electric stacker truck boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption. The electric stacker truck is equipped with innovative lithium-ion technology. When compared to conventional lead-acid batteries, these high-performance batteries impress with their lasting performance, faster charging times and lack of maintenance requirements. The on-board charger ensures straightforward, flexible charging at any 230 V socket.

Jungheinrich offers a 6-month satisfaction guarantee for its electric stacker trucks equipped with lithium-ion technology. With this guarantee, customers can quickly and easily revert to the original technology. In addition, Jungheinrich guarantees the long-term performance of the installed lithium-ion battery by covering it with up to 8 years of warranty.

The Jungheinrich EJC 110/DZ electric stacker truck with three-stage telescopic mast and free lift reaches very high lift heights with a comparatively low design height. Order the electric high-lift stacker truck from our shop in your chosen configuration.