Select article:
This item corresponds to your selection:
DELIVERY: APPROXIMATELY 45 WORKING DAYS
Similar Products
Buy:
from £7,740.00 from £8,600.00
Add to basket
Price on request
Add to basket
Buy:
from £9,180.00 from £10,200.00
Add to basket
Price on request
Add to basket
Buy:
from £4,788.00 from £5,320.00
Add to basket
Buy:
£3,969.00 £4,410.00
Add to basket
Buy:
from £3,852.00 from £4,280.00
Add to basket
Buy:
from £3,528.00 from £3,920.00
Add to basket
Buy:
from £8,955.00 from £9,950.00
Add to basket
Buy:
from £8,649.00 from £9,610.00
Add to basket
Buy:
from £9,810.00 from £10,900.00
Add to basket
Buy:
from £3,654.00 from £4,060.00
Add to basket
Buy:
from £11,070.00 from £12,300.00
Add to basket
Buy:
£10,530.00 £11,700.00
Add to basket
Buy:
from £8,046.00 from £8,940.00
Add to basket
Buy:
from £9,900.00 from £11,000.00
Add to basket
Buy:
from £2,672.10 from £2,969.00
Add to basket
Buy:
from £8,271.00 from £9,190.00
Add to basket
Buy:
from £4,491.00 from £4,990.00
Add to basket
Buy:
£108.00 £120.00
Add to basket
Technical details
Technical details
Lift range 90 - 2590 mm
Free lift 100 mm
Mast height 1750 - 2975 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2121 mm
Lift motor output 1.7 kW
Turning radius 1402 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 185 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 672 mm
Fork roller diameter 77 mm
Fork roller width 75 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,33 / 0,33 m/s
Model Jungheinrich EJC 110/ZT
Operating hours 1200 h/Jahr
Residual load capacity 1,000 kg (at lift height: 2,500 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 2500 mm
Mast Two-stage telescopic mast (ZT)
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1822 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lead-acid battery
Battery capacity 150 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 750 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0.12 / 0.22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Technical details
Lift range 90 - 2590 mm
Free lift 100 mm
Mast height 1750 - 2975 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2121 mm
Lift motor output 1.7 kW
Turning radius 1402 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 185 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 672 mm
Fork roller diameter 77 mm
Fork roller width 75 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,33 / 0,33 m/s
Model Jungheinrich EJC 110/ZT
Operating hours 1200 h/Jahr
Residual load capacity 1,000 kg (at lift height: 2,500 mm)
Spare wheel diameter 150 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 2500 mm
Mast Two-stage telescopic mast (ZT)
Capacity 1000 kg
Fork length 1.150 mm
Overall length 1822 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lead-acid battery
Battery capacity 150 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 750 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0.12 / 0.22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Product description
Product description
The EJC 110/ZT is a premium Jungheinrich product boasting outstanding quality "Made in Germany". It is ideal for transporting loads weighing up to 1000 kg and for stacking pallets up to a height of 3600 mm. With innovative technology, an ergonomic design and highest safety standards, the electric high-lift stacker truck is the perfect solution for rapid and efficient stock turnover.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access Agile and compact thanks to minimal aisle width On-board charger for simple battery charging Choice of masts and lift heights
The EJC 110/ZT represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

The electric pallet lifter from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1000 kg across short distances and stacking or retrieving pallets at heights of up to 3600 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 110 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 110 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and crawl speed button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed
truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a two-stage telescopic mast. The ZT or Simplex mast is a two-stage model with direct extension of the mast. A 200 mm stroke of the fork carriage results in a 100 mm movement of the moving mast.

The electric forklift boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption. The EJC 110 draws the necessary power from the integrated lead-acid battery. The on-board charger ensures straightforward, flexible charging at any 230 V socket.
You can also opt for an automatic centralised water replenishment system – known as Aquamatik – for even simpler maintenance: In this case, the battery cells are connected via hoses and supplied by the central water reservoir.

The Jungheinrich EJC 110/ZT electric forklift with two-stage telescopic mast is the perfect solution for even the most demanding applications. Order the electric high-lift stacker truck from our shop in your chosen configuration.
Product description
The EJC 110/ZT is a premium Jungheinrich product boasting outstanding quality "Made in Germany". It is ideal for transporting loads weighing up to 1000 kg and for stacking pallets up to a height of 3600 mm. With innovative technology, an ergonomic design and highest safety standards, the electric high-lift stacker truck is the perfect solution for rapid and efficient stock turnover.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access Agile and compact thanks to minimal aisle width On-board charger for simple battery charging Choice of masts and lift heights
The EJC 110/ZT represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

The electric pallet lifter from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1000 kg across short distances and stacking or retrieving pallets at heights of up to 3600 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 110 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 110 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and crawl speed button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed
truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a two-stage telescopic mast. The ZT or Simplex mast is a two-stage model with direct extension of the mast. A 200 mm stroke of the fork carriage results in a 100 mm movement of the moving mast.

The electric forklift boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption. The EJC 110 draws the necessary power from the integrated lead-acid battery. The on-board charger ensures straightforward, flexible charging at any 230 V socket.
You can also opt for an automatic centralised water replenishment system – known as Aquamatik – for even simpler maintenance: In this case, the battery cells are connected via hoses and supplied by the central water reservoir.

The Jungheinrich EJC 110/ZT electric forklift with two-stage telescopic mast is the perfect solution for even the most demanding applications. Order the electric high-lift stacker truck from our shop in your chosen configuration.