Select article:
This item corresponds to your selection:
£7,160.00 / Unit
with VAT
without VAT

Add to wishlist
DELIVERY: APPROXIMATELY 14 WORKING DAYS
Similar Products
Buy:
from £9,860.00  
Add to basket
Buy:
from £9,190.00  
Add to basket
Buy:
from £8,600.00  
Add to basket
Buy:
from £10,400.00  
Add to basket
Buy:
from £11,000.00  
Add to basket
Buy:
from £9,610.00  
Add to basket
Buy:
from £7,690.00  
Add to basket
Buy:
from £8,940.00  
Add to basket
Buy:
from £10,900.00  
Add to basket
Buy:
from £12,300.00  
Add to basket
Buy:
from £3,920.00  
Add to basket
Buy:
from £5,660.00  
Add to basket
Buy:
£11,500.00  
Add to basket
Buy:
from £4,770.00  
Add to basket
Buy:
from £4,990.00  
Add to basket
Buy:
from £6,230.00  
Add to basket
Buy:
from £4,280.00  
Add to basket
Buy:
from £10,200.00  
Add to basket
Buy:
from £5,320.00  
Add to basket
Buy:
from £9,950.00  
Add to basket
Technical details
Technical details
Lift range 85 - 2585 mm
Mast Two-stage telescopic mast (ZT)
Capacity 1300 kg
Fork length 1150 mm
Overall length 1880 mm
Ground clearance 30 mm
Travel speed, laden/unladen 5 km/h
Battery type Lithium-ion
Battery capacity 100 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 704 kg
Additional wheel width 50 mm
Battery charging time 2 h
Brake electric
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive wheel diameter front 210 mm
Face of forks length 728 mm
Fork roller diameter 80 mm
Fork roller width 70 mm
Fork width 172 mm
Hour meter Yes
Hydraulic oil type Mineral oil
Infeed rollers Yes
Lowering speed with/without load 0,15 / 0,13 m/s
Model Jungheinrich EJC M13 ZT
Noise level as per EN 12053 (operator's ear) 63 dB(A)
Operator type Pedestrian
Route Short distance
Spare wheel diameter 100 mm
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Lift 2500 mm
Mast height 1715 - 2930 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2297 mm
Lift motor output 2.2 kW
Turning radius 1464 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Automatic shut-off without insert 30 min
Battery weight 30 kg
Charger integrated
Control panel two-handed
Display LCD
Drive motor power 1 kW
Drive wheel width front 70 mm
Fork height 55 mm
Fork roller equipment Tandem
Fork support width 540 mm
Free lift 100 mm
Hydraulic oil quantity 1 l
Hydraulic oil viscosity acc. to ISO-VG 46
Lift speed with/without load 0,12 / 0,22 m/s
Max. gradeability laden/unladen 6 / 16 %
No. of batteries 1
Operating hours 800 h/Jahr
Residual load capacity 1,300 kg (at lift height: 2,500 mm)
Scope Indoor
Temperature range 0 - 40 °C
Tiller height 800 - 1240 mm
Technical details
Lift range 85 - 2585 mm
Mast Two-stage telescopic mast (ZT)
Capacity 1300 kg
Fork length 1150 mm
Overall length 1880 mm
Ground clearance 30 mm
Travel speed, laden/unladen 5 km/h
Battery type Lithium-ion
Battery capacity 100 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 704 kg
Additional wheel width 50 mm
Battery charging time 2 h
Brake electric
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive wheel diameter front 210 mm
Face of forks length 728 mm
Fork roller diameter 80 mm
Fork roller width 70 mm
Fork width 172 mm
Hour meter Yes
Hydraulic oil type Mineral oil
Infeed rollers Yes
Lowering speed with/without load 0,15 / 0,13 m/s
Model Jungheinrich EJC M13 ZT
Noise level as per EN 12053 (operator's ear) 63 dB(A)
Operator type Pedestrian
Route Short distance
Spare wheel diameter 100 mm
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Lift 2500 mm
Mast height 1715 - 2930 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2297 mm
Lift motor output 2.2 kW
Turning radius 1464 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Automatic shut-off without insert 30 min
Battery weight 30 kg
Charger integrated
Control panel two-handed
Display LCD
Drive motor power 1 kW
Drive wheel width front 70 mm
Fork height 55 mm
Fork roller equipment Tandem
Fork support width 540 mm
Free lift 100 mm
Hydraulic oil quantity 1 l
Hydraulic oil viscosity acc. to ISO-VG 46
Lift speed with/without load 0,12 / 0,22 m/s
Max. gradeability laden/unladen 6 / 16 %
No. of batteries 1
Operating hours 800 h/Jahr
Residual load capacity 1,300 kg (at lift height: 2,500 mm)
Scope Indoor
Temperature range 0 - 40 °C
Tiller height 800 - 1240 mm
Product description
Product description
The EJC M13 ZT electric high-lift stacker truck is the entry-level model in Jungheinrich's range of electric trucks with lithium-ion technology. The lithium-ion truck with two-stage telescopic mast is available in 4 lift heights ranging up to 3,300 mm. The EJC M13 ZT is ideal for internal transport tasks in which loads weighing up to 1,300 kg are conveyed over short distances and assists you in storing and retrieving goods up to a height of 3,300 mm. The powerful and maintenance-free lithium-ion battery with integrated charger impresses with its constant performance levels, short charging times and long service life, thereby ensuring maximum availability and flexibility.
1,300 kg load capacity 4 different lift heights available (2,300, 2,500, 2,900 and 3,300 mm) Powerful, maintenance-free 100 Ah lithium-ion battery On-board charger for easy rapid and intermediate charging Quick and agile, even in confined spaces PIN code access 2.4" LCD informs about the truck status Efficient, brushless DC motor 2 selectable travel speeds and slow travel function Energy recovery through regenerative braking Intelligent automatic shut-off when not used for 30 minutes
Efficient and manoeuvrable during stacking and retrieval thanks to lithium-ion power

The EJC M13 electric high-lift stacker truck is the entry-level model in Jungheinrich's range of electric trucks with lithium-ion technology. The lithium-ion truck is ideal for internal goods transports in which loads weighing up to 1,300 kg are conveyed over short distances and enables effective storage and retrieval at heights of up to 3,300 mm. The electric high-lift stacker truck is a versatile tool for warehouses and sales areas, and it can also be used as a lift table or workbench for ergonomic order picking.

The electric high-lift stacker truck with two-stage telescopic mast is extremely agile thanks to its compact dimensions and low chassis height, and it can be manoeuvred quickly and efficiently even in confined spaces. For even more flexibility, you can activate a reduced speed mode (3.5 km/h) via the PIN code field on the tiller. And when things get really tight, you can manoeuvre the high-lift truck safely and comfortably in slow travel mode with the tiller raised.

Enjoy the consistently high power levels and impressive performance delivered by the lithium-ion battery. It is characterised by its low energy consumption and long service life while also being entirely maintenance-free. Simple rapid and intermediate charging of the battery is possible without memory effect, thereby ensuring maximum availability and flexibility of your electric truck at all times. Thanks to the on-board charger, the battery can be easily recharged via any 230-V socket. After charging the battery, you simply insert the mains plug of the on-board charger back into the designated slot, and your truck is ready for use.

The EJC M13 ZT provides you with everything you need to ensure rapid, energy-efficient and cost-effective goods turnover. The brushless drive motor with 3-phase AC technology offers impressive performance while also reducing your operating costs. The regenerative brake recovers energy when the travel speed is reduced. The intelligent automatic shut-off protects the battery, with the truck switching itself off automatically when not used for 30 minutes.

The Jungheinrich electric high-lift stacker truck impresses with its intuitive operating concept. The EJC M13 ZT is activated by entering a 4-digit PIN code on the tiller head. PIN code access provides reliable protection against unauthorised use. You control the central functions of lifting, lowering, travel, accelerating, braking and steering conveniently via the ergonomic multifunction tiller handle, which can be operated with either hand. The one-handed operation makes working even easier and more comfortable. Important control instruments such as the battery charge level, operating hour counter, travel speed and status messages are always in your field of vision on the 2.4" LCD display. A warning light informs you immediately when the battery charge is too low.

Thanks to a wide range of safety features, the Jungheinrich EJC M13 ZT is the perfect tool for safe and ergonomic working. The long, low-set tiller ensures a sufficient safety distance between the operator and the truck and significantly reduces the effort required for steering. The minimal ground clearance of just 30 mm and the fully encased housing provide effective protection against foot injuries. The easily accessible emergency disconnect switch and the collision safety switch integrated in the tiller head ensure optimum protection in dangerous situations. The low frame height and optimum visibility through the mast mean that even smaller operators have a clear view of the fork tips and the load at all times. The Plexiglas panel in front of the mast prevents you from reaching through accidentally.

The EJC M13 ZT is equipped with a two-stage telescopic mast. The ZT or duplex mast is a two-stage model, in which the fork carriage and inner mast move simultaneously at a ratio of 2:1 – i.e. raising the forks by 600 mm results in the mast being extended by 300 mm. A particularly beneficial feature of the EJC M13 ZT is that it is quite small in size relative to its high lift height, a fact that makes it ideal for low ceiling heights.

Experience the many benefits offered by the Jungheinrich EJC M13 ZT electric high-lift stacker truck with two-stage telescopic mast and lithium-ion battery. Order the electric stacker truck from our shop in your required lift height.


Product description
The EJC M13 ZT electric high-lift stacker truck is the entry-level model in Jungheinrich's range of electric trucks with lithium-ion technology. The lithium-ion truck with two-stage telescopic mast is available in 4 lift heights ranging up to 3,300 mm. The EJC M13 ZT is ideal for internal transport tasks in which loads weighing up to 1,300 kg are conveyed over short distances and assists you in storing and retrieving goods up to a height of 3,300 mm. The powerful and maintenance-free lithium-ion battery with integrated charger impresses with its constant performance levels, short charging times and long service life, thereby ensuring maximum availability and flexibility.
1,300 kg load capacity 4 different lift heights available (2,300, 2,500, 2,900 and 3,300 mm) Powerful, maintenance-free 100 Ah lithium-ion battery On-board charger for easy rapid and intermediate charging Quick and agile, even in confined spaces PIN code access 2.4" LCD informs about the truck status Efficient, brushless DC motor 2 selectable travel speeds and slow travel function Energy recovery through regenerative braking Intelligent automatic shut-off when not used for 30 minutes
Efficient and manoeuvrable during stacking and retrieval thanks to lithium-ion power

The EJC M13 electric high-lift stacker truck is the entry-level model in Jungheinrich's range of electric trucks with lithium-ion technology. The lithium-ion truck is ideal for internal goods transports in which loads weighing up to 1,300 kg are conveyed over short distances and enables effective storage and retrieval at heights of up to 3,300 mm. The electric high-lift stacker truck is a versatile tool for warehouses and sales areas, and it can also be used as a lift table or workbench for ergonomic order picking.

The electric high-lift stacker truck with two-stage telescopic mast is extremely agile thanks to its compact dimensions and low chassis height, and it can be manoeuvred quickly and efficiently even in confined spaces. For even more flexibility, you can activate a reduced speed mode (3.5 km/h) via the PIN code field on the tiller. And when things get really tight, you can manoeuvre the high-lift truck safely and comfortably in slow travel mode with the tiller raised.

Enjoy the consistently high power levels and impressive performance delivered by the lithium-ion battery. It is characterised by its low energy consumption and long service life while also being entirely maintenance-free. Simple rapid and intermediate charging of the battery is possible without memory effect, thereby ensuring maximum availability and flexibility of your electric truck at all times. Thanks to the on-board charger, the battery can be easily recharged via any 230-V socket. After charging the battery, you simply insert the mains plug of the on-board charger back into the designated slot, and your truck is ready for use.

The EJC M13 ZT provides you with everything you need to ensure rapid, energy-efficient and cost-effective goods turnover. The brushless drive motor with 3-phase AC technology offers impressive performance while also reducing your operating costs. The regenerative brake recovers energy when the travel speed is reduced. The intelligent automatic shut-off protects the battery, with the truck switching itself off automatically when not used for 30 minutes.

The Jungheinrich electric high-lift stacker truck impresses with its intuitive operating concept. The EJC M13 ZT is activated by entering a 4-digit PIN code on the tiller head. PIN code access provides reliable protection against unauthorised use. You control the central functions of lifting, lowering, travel, accelerating, braking and steering conveniently via the ergonomic multifunction tiller handle, which can be operated with either hand. The one-handed operation makes working even easier and more comfortable. Important control instruments such as the battery charge level, operating hour counter, travel speed and status messages are always in your field of vision on the 2.4" LCD display. A warning light informs you immediately when the battery charge is too low.

Thanks to a wide range of safety features, the Jungheinrich EJC M13 ZT is the perfect tool for safe and ergonomic working. The long, low-set tiller ensures a sufficient safety distance between the operator and the truck and significantly reduces the effort required for steering. The minimal ground clearance of just 30 mm and the fully encased housing provide effective protection against foot injuries. The easily accessible emergency disconnect switch and the collision safety switch integrated in the tiller head ensure optimum protection in dangerous situations. The low frame height and optimum visibility through the mast mean that even smaller operators have a clear view of the fork tips and the load at all times. The Plexiglas panel in front of the mast prevents you from reaching through accidentally.

The EJC M13 ZT is equipped with a two-stage telescopic mast. The ZT or duplex mast is a two-stage model, in which the fork carriage and inner mast move simultaneously at a ratio of 2:1 – i.e. raising the forks by 600 mm results in the mast being extended by 300 mm. A particularly beneficial feature of the EJC M13 ZT is that it is quite small in size relative to its high lift height, a fact that makes it ideal for low ceiling heights.

Experience the many benefits offered by the Jungheinrich EJC M13 ZT electric high-lift stacker truck with two-stage telescopic mast and lithium-ion battery. Order the electric stacker truck from our shop in your required lift height.


from £7,160.00