Select article:
This item corresponds to your selection:
£4,440.00 / Unit
with VAT
without VAT

Add to wishlist
DELIVERY: APPROXIMATELY 65 WORKING DAYS
Similar Products
Buy:
from £3,110.00  
Add to basket
Buy:
£4,430.00  
Add to basket
Buy:
from £2,290.00  
Add to basket
Buy:
from £3,110.00  
Add to basket
Buy:
from £1,140.00  
Add to basket
Buy:
from £3,139.00  
Add to basket
Buy:
from £5,970.00  
Add to basket
Buy:
£2,070.00  
Add to basket
Buy:
from £3,139.00  
Add to basket
Buy:
from £5,740.00  
Add to basket
Buy:
£1,140.00  
Add to basket
Buy:
from £4,109.00  
Add to basket
Buy:
£6,280.00  
Add to basket
Buy:
from £3,110.00  
Add to basket
Buy:
from £4,109.00  
Add to basket
Buy:
from £2,290.00  
Add to basket
Buy:
from £2,280.00  
Add to basket
Buy:
from £10,300.00  
Add to basket
Buy:
£2,870.00  
Add to basket
Buy:
from £4,539.00  
Add to basket
Technical details
Technical details
Capacity 1500 kg
Lift range 85 - 795 mm
Overall width 540 mm
Fork support width 540 mm
Steering wheel material Nylon
Fork roller equipment Tandem
Aisle width 1.830 mm
Control panel two-handed
Face of forks length 340 mm
Fork roller diameter 75 mm
Fork width 163 mm
Ground clearance 19 mm
Lift 710 mm
Lift speed with/without load 0.15 / 0.09 m/s
Model Jungheinrich AMX I15
Pallet truck material Stainless steel
Route Short distance
Steering wheel diameter 150 mm
Temperature range -35 - 40 °C
Tiller surface glass-bead blasted
Fork length 1.200 mm
Lift type manual
Overall length 1580 mm
Load centre 600 mm
Fork roller material Nylon
Net weight 125 kg
Chassis surface glass-bead blasted
Drive manual
Fork height 50 mm
Fork roller width 68 mm
Grease nipple Yes
Handle fittings Stainless steel
Lift height per pump stroke 10/35
Lowering speed with/without load 0,07 / 0,05 m/s
Operator type Manual
Rapid lift Yes
Steering radius 180 °
Steering wheel width 45 mm
Tiller height 1270 mm
Turning radius 1.480 mm
Technical details
Capacity 1500 kg
Lift range 85 - 795 mm
Overall width 540 mm
Fork support width 540 mm
Steering wheel material Nylon
Fork roller equipment Tandem
Aisle width 1.830 mm
Control panel two-handed
Face of forks length 340 mm
Fork roller diameter 75 mm
Fork width 163 mm
Ground clearance 19 mm
Lift 710 mm
Lift speed with/without load 0.15 / 0.09 m/s
Model Jungheinrich AMX I15
Pallet truck material Stainless steel
Route Short distance
Steering wheel diameter 150 mm
Temperature range -35 - 40 °C
Tiller surface glass-bead blasted
Fork length 1.200 mm
Lift type manual
Overall length 1580 mm
Load centre 600 mm
Fork roller material Nylon
Net weight 125 kg
Chassis surface glass-bead blasted
Drive manual
Fork height 50 mm
Fork roller width 68 mm
Grease nipple Yes
Handle fittings Stainless steel
Lift height per pump stroke 10/35
Lowering speed with/without load 0,07 / 0,05 m/s
Operator type Manual
Rapid lift Yes
Steering radius 180 °
Steering wheel width 45 mm
Tiller height 1270 mm
Turning radius 1.480 mm
Product description
Product description
The manual-hydraulic Jungheinrich AMX I15 stainless steel scissor lift pallet truck is fully corrosion and acid-resistant and meets all common hygiene requirements. This makes the scissor lift pallet truck ideal for humid and harsh environments. The stainless steel pallet truck is a premium product offering robust quality "Made in Europe".
Corrosion-resistant thanks to high stainless steel content Sealed hydraulics prevent ingress of water Easy to clean Closed fork tips for greater hygiene Food-grade lubricants (class H1/H2)
The AMX I15 – for areas prone to high levels of corrosion and for exacting hygiene requirements

The Jungheinrich AMX I15 stainless steel scissor lift pallet truck was designed specifically for use in harsh working environments. The construction features a high proportion of rust-proof stainless steel, including components such as the tiller, axle and the support arm lever. The chassis is made from acid-resistant stainless steel. Truck parts that do not come into direct contact with foodstuffs, such as the yoke / pivot arm and push rod are hot-dip galvanised. The pump is electro-galvanised and yellow-chromated.
The use of these corrosion-resistant materials makes the scissor lift pallet truck ideal for humid and harsh environments. In addition, the scissor lift pallet truck meets all common hygiene requirements of the food industry.
The pallet truck hydraulics are specially protected to prevent ingress of foreign bodies and water. Closed fork tips ensure that the fork rollers do not spray any water or dirt onto the transported load. Cavities are either freely accessible or fully sealed to enable effective cleaning – bacteria has no place to hide! This is further facilitated by the electrically polished surfaces. Only food-grade lubricants of class H1/H2 are used.
You operate the robust and reliable scissor lift pallet truck using a functional control element that is equally well suited to both left and right-handed users. The special lowering valve allows you to lower the load with utmost control and precision using the hand lever.
A manual quick lift function can also be activated via the hand lever. The very short headlength enables safe, effortless use in even the tightest of spaces.
The scissor lift pallet truck can transport loads weighing up to 1500 kg or raise them to an ergonomic working height. As of a lift height of 470 mm, the capacity is reduced to 1000 kg. You can adjust your individual working height up to a maximum of 795 mm. As of a lift height of approx. 400 mm, side-mounted support feet secure the scissor lift pallet truck for additional safety and stability. A pressure relief valve protects the hydraulic system against overload. The robust, torsion-free construction of the fork arms retains its shape even when subjected to maximum loads.
Depending on your specific application, you can opt for steering castors and fork rollers in either nylon or polyurethane. Polyurethane tyres ensure maximum comfort and quiet operation, while nylon tyres are characterised by their robustness and high chemical resistance. For enhanced stability and floor protection, the AMX I15 features tandem fork rollers as standard.

The Jungheinrich AMX I15 stainless steel scissor pallet truck is an ideal choice for harsh chemical environments or areas with stringent hygiene standards. Order it from our shop today.
Product description
The manual-hydraulic Jungheinrich AMX I15 stainless steel scissor lift pallet truck is fully corrosion and acid-resistant and meets all common hygiene requirements. This makes the scissor lift pallet truck ideal for humid and harsh environments. The stainless steel pallet truck is a premium product offering robust quality "Made in Europe".
Corrosion-resistant thanks to high stainless steel content Sealed hydraulics prevent ingress of water Easy to clean Closed fork tips for greater hygiene Food-grade lubricants (class H1/H2)
The AMX I15 – for areas prone to high levels of corrosion and for exacting hygiene requirements

The Jungheinrich AMX I15 stainless steel scissor lift pallet truck was designed specifically for use in harsh working environments. The construction features a high proportion of rust-proof stainless steel, including components such as the tiller, axle and the support arm lever. The chassis is made from acid-resistant stainless steel. Truck parts that do not come into direct contact with foodstuffs, such as the yoke / pivot arm and push rod are hot-dip galvanised. The pump is electro-galvanised and yellow-chromated.
The use of these corrosion-resistant materials makes the scissor lift pallet truck ideal for humid and harsh environments. In addition, the scissor lift pallet truck meets all common hygiene requirements of the food industry.
The pallet truck hydraulics are specially protected to prevent ingress of foreign bodies and water. Closed fork tips ensure that the fork rollers do not spray any water or dirt onto the transported load. Cavities are either freely accessible or fully sealed to enable effective cleaning – bacteria has no place to hide! This is further facilitated by the electrically polished surfaces. Only food-grade lubricants of class H1/H2 are used.
You operate the robust and reliable scissor lift pallet truck using a functional control element that is equally well suited to both left and right-handed users. The special lowering valve allows you to lower the load with utmost control and precision using the hand lever.
A manual quick lift function can also be activated via the hand lever. The very short headlength enables safe, effortless use in even the tightest of spaces.
The scissor lift pallet truck can transport loads weighing up to 1500 kg or raise them to an ergonomic working height. As of a lift height of 470 mm, the capacity is reduced to 1000 kg. You can adjust your individual working height up to a maximum of 795 mm. As of a lift height of approx. 400 mm, side-mounted support feet secure the scissor lift pallet truck for additional safety and stability. A pressure relief valve protects the hydraulic system against overload. The robust, torsion-free construction of the fork arms retains its shape even when subjected to maximum loads.
Depending on your specific application, you can opt for steering castors and fork rollers in either nylon or polyurethane. Polyurethane tyres ensure maximum comfort and quiet operation, while nylon tyres are characterised by their robustness and high chemical resistance. For enhanced stability and floor protection, the AMX I15 features tandem fork rollers as standard.

The Jungheinrich AMX I15 stainless steel scissor pallet truck is an ideal choice for harsh chemical environments or areas with stringent hygiene standards. Order it from our shop today.
from £4,440.00