Select article:
This item corresponds to your selection:
DELIVERY: APPROXIMATELY 45 WORKING DAYS
Similar Products
Buy:
from £7,740.00 from £8,600.00
Add to basket
Price on request
Add to basket
Buy:
from £9,180.00 from £10,200.00
Add to basket
Price on request
Add to basket
Buy:
from £4,788.00 from £5,320.00
Add to basket
Buy:
£3,969.00 £4,410.00
Add to basket
Buy:
from £3,852.00 from £4,280.00
Add to basket
Buy:
from £3,528.00 from £3,920.00
Add to basket
Buy:
from £8,955.00 from £9,950.00
Add to basket
Buy:
from £8,649.00 from £9,610.00
Add to basket
Buy:
from £9,810.00 from £10,900.00
Add to basket
Buy:
from £3,654.00 from £4,060.00
Add to basket
Buy:
from £11,070.00 from £12,300.00
Add to basket
Buy:
£10,530.00 £11,700.00
Add to basket
Buy:
from £8,046.00 from £8,940.00
Add to basket
Buy:
from £9,900.00 from £11,000.00
Add to basket
Buy:
from £2,672.10 from £2,969.00
Add to basket
Buy:
from £8,271.00 from £9,190.00
Add to basket
Buy:
from £4,491.00 from £4,990.00
Add to basket
Buy:
£108.00 £120.00
Add to basket
Technical details
Technical details
Lift range 90 - 4180 mm
Free lift 1338 mm
Mast height 1845 - 4597 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2121 mm
Lift motor output 2.0 kW
Turning radius 1409 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 151 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 672 mm
Fork roller diameter 85 mm
Fork roller width 110 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,43 / 0,37 m/s
Model Jungheinrich EJC 112/DZ
Operating hours 1200 h/Jahr
Residual load capacity 1,200 kg (at lift height: 2,800 mm)
800 kg (at lift height: 3,600 mm)
600 kg (at lift height: 4,090 mm)
Spare wheel diameter 140 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 4090 mm
Mast Three-stage telescopic mast with free lift (DZ)
Capacity 1200 kg
Fork length 1.150 mm
Overall length 1822 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lead-acid battery
Battery capacity 150 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 830 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0.13 / 0.22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Technical details
Lift range 90 - 4180 mm
Free lift 1338 mm
Mast height 1845 - 4597 mm
Load centre 600 mm
Overall width 800 mm
Aisle width 2121 mm
Lift motor output 2.0 kW
Turning radius 1409 mm
Battery voltage 24 V/per unit
Drive wheel material Polyurethane (PU)
Colour chassis Jungheinrich yellow
Access system PIN-Code
Battery weight 151 kg
Charger integrated
Control panel two-handed
Display Discharge monitor
Drive control type AC speed control
Drive wheel diameter front 230 mm
Face of forks length 672 mm
Fork roller diameter 85 mm
Fork roller width 110 mm
Fork width 185 mm
IP protection type display IP 65
Lowering speed with/without load 0,43 / 0,37 m/s
Model Jungheinrich EJC 112/DZ
Operating hours 1200 h/Jahr
Residual load capacity 1,200 kg (at lift height: 2,800 mm)
800 kg (at lift height: 3,600 mm)
600 kg (at lift height: 4,090 mm)
Spare wheel diameter 140 mm
Temperature range 5 - 40 °C
Tiller height 1305 mm
Lift 4090 mm
Mast Three-stage telescopic mast with free lift (DZ)
Capacity 1200 kg
Fork length 1.150 mm
Overall length 1822 mm
Ground clearance 30 mm
Travel speed, laden/unladen 6 / 6 km/h
Battery type Lead-acid battery
Battery capacity 150 Ah/per unit
Fork roller material Polyurethane (PU)
Net weight incl. battery 830 kg
Additional wheel width 54 mm
Brake generator
Chassis surface powder-coated
Creep speed button Yes
Drive electric
Drive motor power 1.0 kW
Drive wheel width front 70 mm
Fork height 56 mm
Fork roller equipment Single
Fork support width 570 mm
Hydraulic proportional
Lift speed with/without load 0.13 / 0.22 m/s
Max. gradeability laden/unladen 8 / 16 %
Noise level as per EN 12053 (operator's ear) 62 dB(A)
Operator type Pedestrian
Scope Indoor use, Outdoor use
Telematics box Yes
Tiller RAL colour RAL 7016 anthracite grey
Tiller surface powder-coated
Product description
Product description
The EJC 112 is ideal for transporting loads weighing up to 1,200 kg and for stacking pallets up to a height of 4,700 mm. The Jungheinrich premium product serves as a perfect example of outstanding mechanical engineering "Made in Germany" and offers maximum performance with reduced operating costs. The electric stacker impresses with a powerful, maintenance-free three-phase AC motor and long battery operating times. Thanks to the narrow aisle width, the EJC 112 remains highly agile in even the tightest of spaces and is easy and safe to manoeuvre. The slow travel function enables safe manoeuvring with the tiller raised. The speed-controlled hydraulic motor and proportional hydraulics ensure precise lifting and gentle lowering of the load. Choose between different mast types with lift heights of up to 4,700 mm depending on the specific requirements of your application. For even more performance, the EJC 112 is also available with lithium-ion technology.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access Agile and compact thanks to minimal aisle width On-board charger for simple battery charging Choice of masts and lift heights
The EJC 112/DZ represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

The electric pallet lifter from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1,200 kg across short distances and stacking or retrieving pallets at heights of up to 4,700 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 112 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 112 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and crawl speed button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed
truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a three-stage telescopic mast with free lift. With the DZ or triplex mast, very high lift heights can be reached with a comparatively low design height. The DZ mast also offers a high free lift, meaning that the load carriage is raised without altering the height of the mast. Once the maximum free lift has been reached, the fork carriage and mast extend in a 1:1 ratio.

The electric forklift boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption, thereby enabling rapid and efficient stock turnover. The EJC 112 draws the necessary power from the integrated lead-acid battery. The on-board charger ensures straightforward, flexible charging at any 230 V socket.

You can also opt for an automatic centralised water replenishment system – known as Aquamatik – for even simpler maintenance: In this case, the battery cells are connected via hoses and supplied by the central water reservoir.

The Jungheinrich EJC 112/DZ electric stacker truck with three-stage telescopic mast and free lift reaches very high lift heights with a comparatively low design height. Order the electric high-lift stacker truck from our shop in your chosen configuration.
Product description
The EJC 112 is ideal for transporting loads weighing up to 1,200 kg and for stacking pallets up to a height of 4,700 mm. The Jungheinrich premium product serves as a perfect example of outstanding mechanical engineering "Made in Germany" and offers maximum performance with reduced operating costs. The electric stacker impresses with a powerful, maintenance-free three-phase AC motor and long battery operating times. Thanks to the narrow aisle width, the EJC 112 remains highly agile in even the tightest of spaces and is easy and safe to manoeuvre. The slow travel function enables safe manoeuvring with the tiller raised. The speed-controlled hydraulic motor and proportional hydraulics ensure precise lifting and gentle lowering of the load. Choose between different mast types with lift heights of up to 4,700 mm depending on the specific requirements of your application. For even more performance, the EJC 112 is also available with lithium-ion technology.
Premium quality – "Made in Germany" Powerful and maintenance-free three-phase AC drive motor Proportional hydraulics for precision lifting and lowering PIN code access Agile and compact thanks to minimal aisle width On-board charger for simple battery charging Choice of masts and lift heights
The EJC 112/DZ represents Jungheinrich's performance class and delivers premium quality "Made in Germany"

The electric pallet lifter from the Jungheinrich EJC 1 series makes light work of transporting loads weighing up to 1,200 kg across short distances and stacking or retrieving pallets at heights of up to 4,700 mm.

You control all travel, lifting and lowering functions via the ergonomic multifunction tiller head, thus allowing you to devote your full attention to the task at hand. Comprehensive control instruments provide you with a clear overview at all times.

The EJC 112 is the perfect tool for safe and efficient stacking and retrieving. The speed-controlled, low-noise hydraulic motor ensures that the load is lowered gently and with utmost precision. The proportional hydraulics allow you to deposit sensitive loads on the rack or ground with maximum care.

The EJC 112 is supremely agile thanks to its compact dimensions and minimal aisle width. With the tiller raised and crawl speed button depressed, you can work safely in even the tightest of spaces. The rounded and enclosed
truck geometry, the four-wheel concept for maximum stability and the long safety tiller combine to offer maximum protection for the operator.

The pedestrian truck is equipped with a three-stage telescopic mast with free lift. With the DZ or triplex mast, very high lift heights can be reached with a comparatively low design height. The DZ mast also offers a high free lift, meaning that the load carriage is raised without altering the height of the mast. Once the maximum free lift has been reached, the fork carriage and mast extend in a 1:1 ratio.

The electric forklift boasts innovative drive technology and a sophisticated control system. The powerful, maintenance-free drive motor features 24 V three-phase AC technology for maximum performance with minimum energy consumption, thereby enabling rapid and efficient stock turnover. The EJC 112 draws the necessary power from the integrated lead-acid battery. The on-board charger ensures straightforward, flexible charging at any 230 V socket.

You can also opt for an automatic centralised water replenishment system – known as Aquamatik – for even simpler maintenance: In this case, the battery cells are connected via hoses and supplied by the central water reservoir.

The Jungheinrich EJC 112/DZ electric stacker truck with three-stage telescopic mast and free lift reaches very high lift heights with a comparatively low design height. Order the electric high-lift stacker truck from our shop in your chosen configuration.