This robust mesh container is ideal for collecting, separating and disposing of light goods such as paper or green waste. The tipping container is emptied using a cross beam and is equipped with mesh side walls.
Compact tipping container for cross beam emptying, with mesh side walls
Forklift cross beam available as accessory
Forklift compatibility via fork pockets on cross beam
With protection against slippage
Robust tipping container with mesh side walls
This mesh tipping container is ideal for separating, collecting and/or disposing of light materials. The mesh side walls provide an optimum view of the collected contents while also providing ventilation. The cross beam system enables full rotation and thus complete emptying of the container.
The base of the container is made from steel plate. The side walls are made from wire mesh with a size of 25 x 25 mm (L x W). To protect against corrosion, the material is either painted or hot-dip galvanised. To raise the tipping container, it is attached to the corresponding forklift cross beam. You then pick up the cross beam with a forklift truck via the fork pockets in order to lift the mesh container over a disposal container or transport it to the relevant location. A safety chain prevents any slipping or unintentional tipping of the container. A cable pull allows the container to be emptied directly from the driver's seat. After emptying, you manually return the mesh tipping container to its original loading position.
Order the tipping container with mesh side walls from our shop today.
Fork pockets inside clearance
Fork pockets inside width
Fork pockets inside height